|

Amigurumi Siba’s dog Free Pattern

Dog Siba Inu Lalafanfan free pattern With these materials, the toy turns out to be ~ 26cm with ears. The size of the toy may vary due to the density of your knitting and the materials you use. .

MATERIALS FOR WORK:

1. Yarn Himalaya Dolfin Baby (or equivalent) gray 80325 – 1 skein. (can be brown), White 80301 – a little.

2. YarnArt Jeans 74 – soft pink, you can use any other – for a jacket, 05 – beige or any other – for a bag.

3. For a bandage – I have a thin soft pink bobbin velor, you can knit it from soft pink plush or

YarnArt Jeans(74), just select the hook for your yarn. Choose the number of loops and rows in the bandage yourself, trying on a toy.

4. Hooks – 4.0 for a toy, 2.0 for a bandage (or under your yarn). 1.75 – for a handbag.

5. Knitting needles 3.0 – for sweaters.

6. Wire for glasses, section 2mm. You can take ready-made round ones, if available. I made glasses according to MK on YouTube (type in the search – glasses for a wire toy.)

7. Spout black, on a secure mount 18*14mm

8. Eyes are black on a secure mount – I have 14mm, but I think 16mm would be better. Which one do you like better.

9. Button 1pc, diameter 10-12mm – for a bag.

10. Buttons or buttons for jackets – 3 pieces of your choice.

11. Filler.

12. Scissors

13. Needle for stitching parts.

LEGEND:

MR- amigurumi ring

CH- air loop

SL-ST – connecting post

HDC – double crochet

SC – single crochet

İNC – increase

DEC – decrease

(…) *- repeat the specified number of times.

UPPER FEET : 2pcs-grey.

1p- 6SC in MR

2p- 6İNC(12)

3р- (3SC;İNC)*3(15)

4-8p-15SC (5 rows)

9р- (3SC;DEC)*3(12)

10р- (4SC;DEC)*2(10)

Fill quite a bit, only the lower part of the foot.

Fold in half and knit together 5SC. Fasten the thread, cut.

LEGS-BODY-HEAD: Gray, knit in one piece.

1p- 6SC in MR

2p-6İNC (12)

3p- (3SC; İNC) * 3 (15)

4-8p-15SC (5 rows)

On the first leg we make SL-ST, we cut the thread. On the second leg we continue to knit:

9p- 1CH, connect the legs SL-ST, then knit one leg at a time

15SC; 1SC to CH; 15SC on the second leg; 1SC to CH. (32)

10р-(14SC;2İNC)*2 (36)

11r- (5SC; İNC) * 6 (42)

12r- (6SC; İNC) * 6 (48)

13-15p- 48SC (3 rows). We stuff the legs.

16p- (14SC; DEC) * 3 (45)

17р- (13SC; DEC) * 3 (42)

18р- (12SC; DEC)*3 (39)

19р- (11SC;DEC)*3 (36)

20r- (4SC; DEC) * 6 (30)

21r-30SC

22р-(3SC;DEC)*6 (24)

In the next row we knit the upper paws.

Place them strictly on the sides of the body and knit the legs and body together along the row.

23r- (2SC; DEC) * 6 (18)

24r- 18 increments (36)

25r- (2SC; İNC) * 12 (48)

26r- (7SC; İNC) * 6 (54)

27r- (8SC; İNC) * 6 (60)

28-36r-60SC (9 rows) Stuff the body.

37r- (8SC; DEC) * 6 (54)

38r- (7SC; DEC) * 6 (48)

39r- (6SC; DEC) * 6 (42)

40r- (5SC; DEC) * 6 (36)

41r- (4SC; DEC) * 6 (30)

Between the 31st and 32nd rows, insert the eyes, between the eyes 7SC. We fill the head, giving the shape of a ball. Stuff the neck especially tightly.

42r- (3SC; DEC) * 6 (24)

43r- 12decreases (12)

44r- 6dec (6), SL-ST

Fill your head to the end. Cut the thread, pull off the remaining loops. Fasten the thread and hide inside.

 EARS: 2 pcs

For one ear we knit two identical parts – one white, the other gray. On the white part, cut the thread. Not on gray, we will tie it with it.

1p- Cast on 2CH in 2nd st, work 3SC.

2p- 1CH, turn, 3İNC (6)

3p- 1CH, turn, 1SC, İNC, 2SC İNC, 1SC (8)

4p- 1CH, turn, 8SC.

5p- 1CH, turn, 8SC.

1p- 6SC in MR

2p-6İNC (12)

3p- (3SC; İNC) * 3 (15)

4-5r- 15SC (2 rows)

Fasten the thread, leave for sewing.

Insert a black nose between the 2nd and 3rd rows. With black thread, embroider stripes on the spout.

We put the two parts together, the white part is on top. We tie both parts SC. At the beginning, at the top and at the end, work 2SC.

Ears

sew to the head, in the middle, between the ears 5-6SC. Ears lightly bend when sewing.

 Muzzle: 2 parts in white.

1p- 6SC in MR

2p-6İNC (12)

3p- (1SC; İNC) * 6 (18)

4p-1SC; İNC; (2SC;İNC)*5; 1SC (24)

5p-3SC; 6HDC; 6SC; 6HDC; 3SC(24), SL-ST.

The thread can be left longer and sewn to the body with it. Can be trimmed and sewn on with white cotton thread.

 NOSE: white.

 TAIL: grey.

Cast on 5 CH, from 2nd st we knit 4SC, 1 CH, turn, 3SC, SL-ST and continue SL-ST to the end of the row in a circle. Fasten the thread, leave for sewing.

ASSEMBLY:

Sew the ears to the head, in the middle, between the ears 5-6st.

Bend the ears slightly when sewing. Sew a tail in the back in the middle in the 13th row.

Sew two identical parts of the muzzle, close to each other, immediately under the eyes. Fill with some filler. From above, in the middle between the eyes, sew a spout, stuffing it with filler. Embroider eyebrows

white plush thread in two additions.

JACKET: knitting needles-3.0

Kr – edge loop

l – front loop

purl – purl loop

reg. (raglan) – nakid, 1 facial, nakid.

facial surface – a row of facial, a row of purl.

Yarn over in the purl row we knit crossed

purl loop (behind the back wall), so that there are no holes.

Cast on 53 stitches.

1p- 53 out.

2p- 1cr, 8l, reg., 8l, reg., 15l, reg., 8l, reg., 8l, 1cr. (61)

3p- 1kr, 59 out, 1kr (61)

4r-1cr, 9l, reg, 10l, reg, 17l, reg, 10l,

 reg, 9l, 1cr (69)

5p- 1kr, 67 out, 1kr (69)

6r- 1cr, 10l, reg, 12l, reg, 19l, reg, 12l, reg, 10l 1cr (77)

7r- 1cr, 75 out, 1cr (77)

8r- 1cr, 11l, reg, 14l, reg, 21l, reg, 14l, reg, 11l, 1cr (85)

9r- 1cr, 83 out, 1cr (85)

10r- 1cr, 12l, reg, 16l, reg, 23l, reg, 16l, reg, 12l, 1cr(93)

11r- 1kr, 91 out, 1kr (93)

12r-1kr, 14l, 18 loops-close, 25l (there will be 26 loops on the needles), 18 loops-close, 13l, 1kr (56)

13r- 1k, 14p, cast on 5 loops, 26p, cast on 5 loops, 14p, 1kr (66)

14-29r (16 rows) – 1kr, facial surface, 1kr (66).

 The last 3-5 rows can be knitted, it looks beautiful.

30r- close all the loops. Put buttons.

 The length of the jacket can be adjusted by the number of rows.

If you need a strap for buttons and loops, then the first 3 loops after the hem and the last 3 loops before the hem are knitted in all rows with facial loops. Under the loops, make holes approximately – in 2p, in

14r and in 26r, knitting in these rows the last 2 loops before the hem together and yarn over. On the next row, knit this yarn over.

 BAG: hook 1.75

Cast on 15 CH, work 14SC from 2nd st, work 14SC on 2nd side of chain. Next, knit in a circle 10 rows – 28SC. Knitting should end in the corner of the bag. Next, dial a chain of CH of the desired length (for me it is 70 CH).

Attach SL-ST to the opposite corner of the bag. We knit 70SC along the chain, connect with the SC bag. Next, we knit the valve with a swivel and in rows:

1p- 13SC

2-4p- 1CH, turn, 13SC.

5p- 1CH, turn, from the 2nd SC we knit 10SC, DEC.

6p- 1CH, turn, from the 2nd SC we knit 8SC, DEC.

7p- 1CH, turn, from the 2nd SC we knit 6SC, DEC.

8p- 1CH, turn, from the 2nd SC we knit 4SC, DEC.

9p- 1CH, turn, from the 2nd SC we knit 2SC, DEC.

10p- 1CH, turn, from the 2nd SC we knit 1DEC.

Next, we tie the valve – 10SC on one side of the valve, then with connecting tables along the front of the bag, then 10SC on the second side of the valve, SL-ST.

Fasten the thread, hide. Sew a button. Put on the toy through the legs.

 BANDAGE:

Dial the right amount air loops according to the volume of the head (I have 92 CH), connect into a ring

(be careful not to twist the chain).

We knit in a circle the required number of rows (I have 14p), SL-ST. The width of the strip is 4.5 cm, the length of the strip folded in half is 17.5-18 cm.

Next, in the same way we knit a strip for a bow, only of a shorter length (I have 70 CH, 14 rows). The width of the main strip and for the bow must be the same width (4.5cm)

The length of the bow folded in half is 12-13cm.

Next, we knit a stripe jumper for a bow. Cast on 16 CH, from the 2nd loop we knit 15SC, 1CH, turn. We knit in rotary rows 6-7 rows.

The jumper should be 2.5cm by 6cm. Leave a long tail for sewing.

Fold the strip for the bow in half, put it on top of the main bandage, form a bow, wrap the bow around the jumper together with one part of the bandage, sew on the wrong side.

GLASSES:

I made my own glasses. You can take ready-made, if available. I made it from wire, with a cross section of 2 mm, according to a video master class on the YouTube channel, in search of scoring – points for a wire toy. I have a diameter of one circle 5cm.

Our dog Shiba Inu

Lalafanfan is ready!!!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *