Amigurumi Milo The Fox Free Pattern

Milo the Fox We continue to share the most beautiful and free amigurumi patterns for you. You can visit our website for Amigurumi Milo the Fox patterns. Amigurumi Milo The Fox

To crochet this fox toy you need:

Amigurumi Milo The Fox

DK (3 or light) weight yarn of orange, brown, white, gray, amber and maroon colours

(100g – 260m / 3,53Oz – 274 yds)

2 ply (0 or lace) weight yarn of beige colour

(100g – 660m / 3,53Oz – 720 yds)

2.5 mm crochet hook

1 mm crochet hook

8 mm safety eyes

Black yarn for embroidering nose

Fiberfill for stuffing

Sewing needle and scissors

Stitch marker (to mark the first stitch on the round)

The height of finished toy is about 20 cm. Size might vary if you use a different weight yarn or hook size.

Abbreviations:

Amigurumi Milo The Fox

st = stitch

sc = single crochet

ch = chain

inc = increase (2 single crochets in one stitch)

dec = invisible decrease (2 stitches together working in front loops only)

sl = slip stitch

BLO = back loops only

(..) = repeat between () number of times indicated

[..] = total number of stitches in the round or row

Crochet in continuous rounds. Do not join, slip stitch or turn unless otherwise stated in the pattern.

Changing the yarn colour: Amigurumi Milo The Fox

While doing a single crochet:

Amigurumi Milo The Fox

Start the single crochet stitch as normal (yarn over and pull through), leaving two loops on your hook. Wrap the new colour yarn around the hook and pull the new colour through the two loops on your hook, completing the single crochet stitch and colour change. Continue as normal in the new colour. Please refer to pictures below.

If you need to start a round with new colour, do these steps on the last stitch of previous round.

Head:

Amigurumi Milo The Fox

Work in rounds. Use white yarn and Amigurumi Milo The Fox

2.5 mm crochet hook.

1. sc 6 in magic ring [6]

2. (inc) repeat 6 times [12]

3. (sc 1, inc) repeat 6 times [18]

4. (sc 1, inc, sc 1) repeat 6 times [24]

5. (sc 3, inc) repeat 6 times [30]

6. (sc 2, inc, sc 2) repeat 6 times [36]

7. (sc 5, inc) repeat 6 times [42]

8. (sc 3, inc, sc 3) repeat 6 times [48]

9. (sc 7, inc) repeat 6 times [54]

10 – 16. sc 54 [54]

17. (sc 7, dec) repeat 6 times [48]

18. (sc 3, dec, sc 3) repeat 6 times [42]

19. (sc 5, dec) repeat 6 times [36]

20. (sc 2, dec, sc 2) repeat 6 times [30]

Insert 8 mm safety eyes between round 14 and 15 (leave 9 stitches between the eyes)

Please always follow manufacturers

instructions & recommendations when attaching safety eyes. You may also use other options when making eyes: embroidering, attaching magic circles, gluing felt etc. Amigurumi Milo The Fox

21. (sc 3, dec) repeat 6 times [24]

22. (sc 1, dec, sc 1) repeat 6 times [18]

Stuff the head.

23. (sc 1, dec) repeat 6 times [12]

24. (dec) repeat 6 times [6]

Fasten off and weave in the end. Amigurumi Milo The Fox

Head cover:

Amigurumi Milo The Fox

Work in rounds. Use orange yarn and

2.5 mm crochet hook

1. sc 6 in magic ring [6]

2. (inc) repeat 6 times [12]

3. (sc 1, inc) repeat 6 times [18]

4. (sc 1, inc, sc 1) repeat 6 times [24]

5. (sc 3, inc) repeat 6 times [30]

6. (sc 2, inc, sc 2) repeat 6 times [36]

7. (sc 5, inc) repeat 6 times [42]

8. (sc 3, inc, sc 3) repeat 6 times [48]

9. (sc 7, inc) repeat 6 times [54]

10 – 16. sc 54 [54]

17. (sc 7, dec) repeat 6 times [48]

Fasten off and leave long thread for sewing.

Snout:

Amigurumi Milo The Fox

Work in rounds. Use white yarn and

2.5 mm crochet hook.

1. sc 6 in magic ring [6]

2. (inc) repeat 6 times [12]

3. (sc 3, inc) repeat 3 times [15]

4. (sc 4, inc) repeat 3 times [18]

5. sc 18 [18]

Fasten off and leave long thread for sewing.

Snout cover:

Amigurumi Milo The Fox

Work in rows. Use orange yarn and

2.5 mm crochet hook.

1. ch 4 [4]

2. Start in second chain from the hook:

sc 3, ch 1 and turn [3]

3. sc 3, ch 1 and turn [3]

4. sc 1, inc, sc 1, ch 1 and turn [4]

5. sc 1, (inc) repeat 2 times, sc 1, ch 1 and turn [6]

6. sc 1, inc, sc 2, inc, sc 1, ch 1 and turn [8]

7. sc 2, inc, sc 2, inc, sc 2, ch 1 and turn [10]

8. sc 10 [10]

Fasten off and leave long thread for sewing.

Ears (make 2):

Amigurumi Milo The Fox

Outer part.

Work in rounds. Use orange yarn and

2.5mm crochet hook.

1. sc 4 in magic ring [4]

2. (inc) repeat 4 times [8]

3. (sc 3, inc) repeat 2 times [10]

4. (sc 4, inc) repeat 2 times [12]

5. (sc 5, inc) repeat 2 times [14]

6. (sc 6, inc) repeat 2 times [16]

7. (sc 7, inc) repeat 2 times [18]

Fasten off and leave long thread for sewing.

Inner part.

Amigurumi Milo The Fox

Work in rows. Use beige yarn and

1 mm crochet hook.

1. ch 2 [2]

2. Start in second chain from the hook:

sc 1, ch 1 and turn [1]

3. inc, ch 1 and turn [2]

4. sc 1, inc, ch 1 and turn [3]

5. sc 2, inc, ch 1 and turn [4]

6. sc 3, inc, ch 1 and turn [5]

7. sc 4, inc [6]

Fasten off and leave long thread for sewing.

Assemble ears:

1. Make the outer part flat and close the bottom by sewing. Leave the remaining thread.

2. Place inner part in the middle of the outer part and sew around.

Assemble the head:

1. Attach the snout between the eyes. Top of the snout should be on round 14. Stuff snout before closing up.

2. Insert the head into head cover. Ensure that 4 rounds remain uncovered above the eyes and that the gap between the eyes and head cover are equal on both sides of the face.

3. Sew the head cover around using back loops.

4. Position snout cover on the snout and above.

It should cover all the way up to the head cover. Sew around.

5. Attaching ears:

Use a stitch marker to mark the middle of the head on round 9. Ears should be spaced 5 stitches apart at the top of the head.

6. Place ears on the side of the head cover.

Begin by attaching inner ear to round 9 and sew ear diagonally out to round 13.

7. Embroider nose on the seam where snout cover starts. Use black yarn.

Please refer to pictures!

Legs (make 2):

Work in rounds. Use brown yarn and

2.5 mm crochet hook.

1. sc 6 in magic ring [6]

2. (inc) repeat 6 times [12]

3. (sc 2, inc) repeat 4 times [16]

4 – 13. sc 16 [16]

Change to orange.

14. (sc 1, change to brown, sc 1, change to orange) repeat 8 times [16]

15. Continue in orange: sc 16 [16]

16 – 27. sc 16 [16]

Fasten off the first leg and set aside. Do not fasten off the second leg and start crocheting part ‘Connecting legs’.

Connecting legs:

Continue from second leg:

ch 2, insert the hook in any st of the first leg (the one which is fastened off) and sc 16, sc 2 in chain stitches, sc 16 around the second leg [36]

Stuff the legs firmly, sc 1 and start crocheting part ‘Body’

Body:

Continue from ‘Connecting legs’:

1. (sc 5, inc) repeat 6 times [42]

2 – 3. sc 42 [42]

Change to gray.

4. sl 42 in BLO [42]

5. sc 42 in BLO [42]

6. sc 42 [42]

Change to amber.

7. sc 42 [42]

8. (sc 6, dec, sc 6) repeat 3 times [39]

Change to gray.

9. (sc 11, dec) repeat 3 times [36]

10. (sc 5, dec, sc 5) repeat 3 times [33]

Change to amber.

11. (sc 9, dec) repeat 3 times [30]

12. (sc 4, dec, sc 4) repeat 3 times [27]

Change to gray.

13. (sc 7, dec) repeat 3 times [24]

14. (sc 3, dec, sc 3) repeat 3 times [21]

Change to amber.

15. (sc 5, dec) repeat 3 times [18]

16. sc 18 [18]

Change to gray.

17 – 18. sc 18 [18]

Stuff the body firmly. Change to white.

19. sl 18 in BLO [18]

20. sc 18 in BLO [18]

Fasten off and leave long thread for sewing.

Arms (make 2):

Work in rounds. Use brown yarn and

2.5 mm crochet hook.

1. sc 6 in magic ring [6]

2. (inc) repeat 6 times [12]

3. (sc 2, inc) repeat 4 times [16]

4 – 5. sc 16 [16]

Change to gray.

6. sl 16 in BLO [16]

7. sc 16 in BLO [16]

8. sc 16 [16]

Change to amber.

9. sc 2, dec, sc 12 [15]

10. sc 6, dec, sc 7 [14]

Change to gray.

11. sc 10, dec, sc 2 [13]

12. sc 2, dec, sc 9 [12]

Change to amber.

13. sc 6, dec, sc 4 [11]

14. sc 2, dec, sc 7 [10]

Change to gray.

15 – 16. sc 10 [10]

Change to amber.

17 – 18. sc 10 [10]

Change to gray.

19 – 20. sc 10 [10]

Change to amber.

21 – 22. sc 10 [10]

Change to gray.

23. sc 10 [10]

Fasten off, stuff the arms firmly and close it by sewing. Leave the remaining thread.

Tail:

Work in rounds. Use white yarn and

2.5 mm crochet hook.

1. sc 6 in magic ring [6]

2. (sc 1, inc) repeat 3 times [9]

3. (sc 1, inc, sc 1) repeat 3 times [12]

4. (sc 3, inc) repeat 3 times [15]

5. (sc 2, inc, sc 2) repeat 3 times [18]

6. (sc 5, inc) repeat 2 times, sc 6 [20]

7. (sc 1, change to white, sc 1, change to orange) repeat 10 times [20]

8. Continue in orange: sc 20 [20]

9 – 15. sc 20 [20]

16. (sc 3, dec) repeat 4 times [16]

17. (sc 1, dec, sc 1) repeat 4 times [12]

Stuff the tail firmly.

18. (dec, sc 1) repeat 4 times [8]

19. (dec) repeat 4 times [4]

Fasten off and leave long thread for sewing

Assemble the fox:

Amigurumi Milo The Fox

1. Attach the arms right below the white neck.

2. Attach the tail to the back of the body, in the middle where the gray colour starts.

3. Sew the body to the head.

Shorts:

Start with the foundation chain. Use maron yarn and 2.5 mm crochet hook.

1. ch 26 [26]

Insert the hook in first st of chain forming a circle. Make sure that your chain isn’t twisted and start crocheting in rounds:

2 – 4. sc 26 [26]

5. sc 12, dec, sc 12 [25]

6. sc 25 [25]

7. sc 23, dec [24]

8. sc 24 [24]

Fasten off and set aside leg 1. Make another piece (leg 2) identical to this one, but do not fasten off.

Connect these two parts (continue from leg 2):

9. Insert the hook in any st of leg 1 (the one you fastened off) and sc 24. Then insert the hook in following st of leg 2 and sc 24 [48]

10. (sc 11, dec, sc 11) repeat 2 times [46]

11. sc 10, dec, sc 11, sc 10, dec, sc 10 [43]

12. sc 42 [42]

ch 1, turn and start crocheting in rows:

13 – 14. sc 42, ch 1 and turn [42]

15. (sc 6, dec, sc 6) repeat 3 times [39]

Fasten off and weave in the ends.

Make upper part of shors:

Amigurumi Milo The Fox

1. Insert the hook in 16th st of row 15 and pull the yarn through. ch 1, sc 1 in same st, sc 8, ch 1 and turn [9]

2 – 3. sc 9, ch 1 and turn [9]

4. sc 9 [9]

Fasten off and weave in the ends.

Make 2 suspenders:

Amigurumi Milo The Fox

1. ch 28 [28]

2. Start in second ch from the hook: sc 27 [27]

Fasten off and leave a long thread for sewing.

Assemble the shorts: Amigurumi Milo The Fox

Attach suspenders to front and back corners of shorts. they should be crossed at the back side. Weave in the ends after sewing and dress your little fox. Amigurumi Milo The Fox

Yorum yapın