Amigurumi Damian Boy Free Pattern

We share the Amigurumi Damian boy pattern for free. You can visit our website for free amigurumi patterns.

Amigurumi Damian Boy Free

Material:

3 and 3.5 mm hook, padding and pressure eyes.

Stamen:

Amigurumi Damian Boy Free

A. 100 grams of stamen SYMPHONY sand (skin).

B. 100 grams of citrus green SYMPHONY yarn (sweater)

C. 50 grams of white SYMPHONY yarn (underwear and shoes)

D. 50 grams of gold SYMPHONY stamen (hair)

E. 50 grams of orange SYMPHONY stamen (cap and fox face)

F. 100 grams of yarn SYMPHONY blue turquoise (pants)

G. 50 grams of yarn SYMPHONY aqua (leggings)

H. some black SYMPHONY stamen (shoes and fox nose)

I. 50 grams of red SYMPHONY yarn (shoes)

J. a little bit of bone-colored SYMPHONY for the fox’s face.

Abbreviations:

Amigurumi Damian Boy Free

SC: Half a point; insert hook at next stitch, loop and pull out one stitch

(2 stitches on hook), make a loop and pass it through all stitches on the hook.

DC: High Point; loop, pass hook through stitch, loop through

the strand through the return point, loop and pass through two of the strands in the

hook, loop and pass it through the remaining two strands on the hook.

İNC: Increase; do two SC at the same point.

DEC: Decrease; insert the hook through the front strand of the two points

next, make a loop and pass it between these points, make a loop and pass it through the 2

stitches on the hook.

SL-ST: Dwarf or Slipped Point; insert the hook at the next point, loop and

remove it by the point on the hook.

CH: Chain.

PTOS: Points.

PP: Pineapple point: [make a loop and insert the hook in the next point, make a loop and pull out a stitch, make a loop and pass it through two points on the hook] repeat 6 times at the same point until you have 7 points on the hook, make a loop and pass it through the 7 stitches on the hook.

HEAD AND BODY: 3mm.

Amigurumi Damian Boy Free

Row 1: 6SC magic ring with yarn A.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4: [2SC, 1İNC] 6 times. 24 pts

Row 5: [3SC, 1İNC] 6 times. 30 pts

Row 6: [4SC, 1İNC] 6 times. 36 pts

Row 7: [5SC, 1İNC] 6 times. 42 pts

Row 8: [6SC, 1İNC] 6 times. 48 pts

Row 9: [7SC, 1İNC] 6 times. 54 pts

Row 10 at 19:54 SC.

Row 20: [7SC, 1DEC] 6 times. 48 Pts.

Place pressure eyes between round 12 and 13 leaving 8 stitches between them.

Row 21: [6SC, 1DEC] 6 times. 42 pts

Row 22: [5SC, 1DEC] 6 times. 36 pts

Row 23: [4SC, 1DEC] 6 times. 30 pts

Row 24: [3SC, 1DEC] 6 times. 24 pts

Begin filling as you knit.

Row 25: [2SC, 1DEC] 6 times. 18 pts

Row 26: [7SC, 1DEC] 2 times. 16 pts

Row 27 at 30:16 SC.

Change to yarn B.

Row 31: [3SC, 1İNC] 4 times. 20 pts

Row 32: 20SC on the back yarn.

Row 33: [4SC, 1İNC] 4 times. 24 pts

Row 34: 24SC.

Row 35: [3SC, 1İNC] 6 times. 30 pts

Row 36: 30SC.

Row 37: [4SC, 1İNC] 6 times. 36 pts

Row 38: 36SC.

Continue filling, you can put a wire around the neck to give it more support.

Row 39: [5SC, 1İNC] 6 times. 42 pts

Row 40: 42SC.

Row 41: [6SC, 1İNC] 6 times. 48 pts

Row 42 to 49: 48SC.

Change to yarn C.

Row 50: 48SC on the back yarn.

Row 51 at 58: 48SC.

Row 59: [6SC, 1DEC] 6 times. 42 pts

Row 60: [5SC, 1DEC] 6 times. 36 pts

Row 61: [4SC, 1DEC] 6 times. 30 pts

Row 62: [3SC, 1DEC] 6 times. 24 pts

Row 63: [2SC, 1DEC] 6 times. 18 pts

Row 63: [1SC, 1DEC] 6 times. 12 pts

Row 64: 6DEC. 6 pts

Bind off with 1SL-ST, pass the strand with the needle around the remaining 6 stitches, pull to close, bind off with a knot and hide the strand. Embroider the nose by basting with yarn A on row 14 and 15.

SWEATER SPRING:

3mm.

Row 1: Flip the doll so that we knit in the opposite direction of the fabric. With yarn B, knit 48SC along the front strand in row 50 of the body.

Row 2 to 5: [1HDC for the front post, 1HDC for the back post] repeat throughout the round (make sure that on each round the stitches coincide in each row so that the front stitches are aligned just like the back points).

Bind off with 1SL-ST and hide the strand.

SWEAT CAP: 3mm.

Row 1: Flip the doll so that we knit in the opposite direction of the fabric. With yarn B, knit 20SC through the front strand of row 31 of the body (this row begins in the middle of the front of the doll).

Row 2: [1SC, 1İNC] 3 times, 8SC, [1İNC, 1SC] 3 times, 1CH and flip. 26 pts

Row 3: 26SC, 1CH and flip. 26 pts

Row 4: [1SC, 1İNC] 3 times, 14SC, [1İNC, 1SC] 3 times, 1CH and flip. 32 pts

Row 5: 32SC, 1CH and flip. 26 pts

Row 6: [1SC, 1İNC] 3 times, 20SC, [1İNC, 1SC] 3 times, 1CH and flip. 38 pts

Row 7 at 28:38 SC, 1CH and flip. 26 pts

Fold the last round in half, and close the inside of the hat making SC to the other edge on both strands, bind off and hideof the strand.

For the cap strap: With yarn B knit 40CH leaving a 10 cm strand at the beginning and at the end, with a yarn needle place in the indicated place and finish placing beads on the edges finishing with a knot to prevent them from falling out.

HAIR: 3.5mm.

This is worked back and forth, it is recommended that the SL-ST of each turn be worked loose to facilitate the work.

Row 1: Leaving a strand of about 15 centimeters at the beginning of the knit, make 17CH with yarn D, 1HDC in the third chain from the hook, 7HDC, 3SC, 4SL-ST, turn. 15 pts

Row 2: 4SL-ST, 3SC, 8HDC, turn. 15 pts

Row 3: 2CH (do not count as a stitch) 8HDC, 3SC, 4SL-ST. 15 pts

Row 4 to 9: Repeat rows 2 and 3 times.

Row 10: 4SL-ST, 3SC, 6HDC, 1DECHDC, turn. 14 pts

Row 11: 2CH (do not count as a stitch) 7HDC, 3SC, 4SL-ST. 14 pts

Row 12: 4SL-ST, 3SC, 5HDC, 1DECHDC, turn. 13 pts

Row 13: 1CH (do not count as a stitch) 1DEC, 4HDC, 3SC, 4SL-ST. 12 pts

Row 14: 4SL-ST, 3SC, 3HDC, 1DECHDC, turn. 11 pts

Row 15: 1CH (do not count as a stitch) 1DEC, 2HDC, 3SC, 4SL-ST. 10 pts

Row 16: 4SL-ST, 3SC, 1HDC, 1DECHDC, turn. 9 pts

Row 17: 1CH (do not count as a stitch) 1DEC, 3SC, 4SL-ST. 8 pts

Row 18: 4SL-ST, 4SC, flip. 8 pts

Row 19: 1CH (do not count as stitch) skip 1 stitch, 3SC, 4SL-ST. 7 pts

Row 20: 3SL-ST, 4SC, flip. 7 pts

Row 19: 1CH (do not count as stitch) skip 1 stitch, 2SC, 4SL-ST. 6 pts

Row 22: 4SL-ST, 2SC, flip. 6 pts

Row 23: 1CH (do not count as a stitch) 2SC, 4SL-ST. 6 pts

Row 24: 4SL-ST, 2SC, flip. 6 pts

Row 25: 1CH (do not count as a stitch) 2SC, 4SL-ST. 6 pts

Row 26: 4SL-ST, 1SC, 1İNC and flip. 7 pts

Row 27: 1CH (do not count as a stitch) 3SC, 4SL-ST. 7 pts

Row 28: 4SL-ST, 2SC, 1İNC and flip. 8 pts

Row 29: 2CH (do not count as stitch) 2HDC together, 3SC, 4SL-ST. 9 pts

Row 30: 4SL-ST, 3SC, 2HDC and flip. 9 pts

Row 31: 2CH (do not count as a stitch) 2HDC together, 1HDC, 3SC, 4SL-ST. 10 pts

Row 32: 4SL-ST, 3SC, 2HDC, 2HDC together and flip. 11 pts

Row 33: 2CH (not count as stitch) 2HDC together, 3HDC, 3SC, 4SL-ST. 12 pts

Row 34: 4SL-ST, 3SC, 4HDC, 2HDC together and flip. 13 pts

Row 35: 2CH (not count as stitch) 2HDC together, 5HDC, 3SC, 4SL-ST. 14 pts

Row 36: 4SL-ST, 3SC, 6HDC, 2HDC together and flip. 15 pts

Row 37: 2CH (do not count as a stitch) 8HDC, 3SC, 4SL-ST. 15 pts

Join both ends of the fabric making SL-ST on the part that will be inside without finishing to make the strands.

HAIR STRAPS: 3.5mm.

Work continues with the same strand through all points on the shore.

We will continue to make double wicks around the entire head, but when we get to the center of the front part we will make 10 simple wicks approximately in the area marked in the photo between pin and pin, then continue with double wicks again until we reach the point of departure.

Double tufts: 6CH, 4SC from the second chain, 4CH, 3SC from the second chain, 1SC in the first chain of the beginning, 1SC.

Single strands: 7CH, 6SC from the second string, 1SC in the first string of the beginning, 1SC.

CAP: 3mm.

This piece is knitted in circles closing each round with 1SL-ST, the front posts have to be aligned in each round.

Row 1: With yarn E, make a magic ring with 12DC, 1SL-ST to close.

Turn 2: 2CH, 1DC through the front post, 2DC together, [1DC, 1DC through the front post, 2DC together] 5 times, 1SL-ST to close. 24 pts

Row 3: 2CH, 1DC by the forward post, 1DC, 2DC together, 1DC, [1DC, 1DC by the forward post, 1DC, 2DC together, 1DC] 5 times, 1SL-ST to close. 36 pts

Row 4: 2CH, 1DC by the forward post, 2DC, 2DC together, 2DC, [1DC, 1DC by the forward post, 2DC, 2DC together, 2DC] 5 times, 1SL-ST to close. 48 pts

Row 5: 2CH, 1DC through the front post, 7DC, [1DC, 1DC through the front post, 7DC] 5 times, 1SL-ST to close. 54 pts

Turn 6: 2CH, 1DC through the front post, 8DC, [1DC, 1DC through the front post, 8DC] 5 times, 1SL-ST to close. 60 pts

Row 7: 2CH, 1DC through the front post, 9DC, [1DC, 1DC through the front post, 9DC] 5 times, 1SL-ST to close. 66 pts.

Row 7 and 8: 66SC.

From this turn on we will begin to knit the visor.

Row 9: 1CH, 21SC on the back strand, flip.

Row 10: 1CH, 4SC, [1İNC, 2SC] 5 times, 2SC, flip.

Row 11: 1CH, skip one stitch, 23SC, skip one stitch, 1SC, flip.

Row 12: 1CH, skip one stitch, 21SC, skip one stitch, 1SC, flip.

Row 13: 1CH, skip one stitch, 19SC, skip one stitch, 1SC, flip.

Row 14: 1CH, skip one stitch, 17SC, skip one stitch, 1SC, flip.

Row 15: Knit from SL-ST around the back around the entire cap, bind off with 1SL-ST leaving one thread to sew to the head.

Make another 8SC magic ring, close with 1SL-ST leaving one strand to attach to the top of the cap tothe button.

TROUSERS: 3mm.

Row 1: Leaving a strand of about 30 centimeters at the beginning of the fabric, knit 48CH with yarn D, 1SL-ST in the first chain to form a circle.

Row 2 at 13:48 SC.

From this round on we will start knitting the trousers.

Row 14: 5SC, leave the rest of the stitches unwoven for now.

SHORT OF THE PANTS (first part):

Row 1: 1CH, skip one stitch, 4SC, flip.

Row 2: 1CH, skip one stitch, 3SC, flip.

Row 3: 1CH, skip one stitch, 2SC, flip.

Row 4: 1CH, skip one stitch, 1SC. (Do not flip)

Row 5: in this round the fabric is not turned over, knit on one side of the previous rounds, 1CH, skip one stitch, 3SC, 1DEC between row 13 and 14 (place a marker at this point), 23SC, do not work the other points at the moment.

PANTS SHOT (part two):

Row 1: 1CH, skip one stitch, 4SC, flip.

Row 2: 1CH, skip one stitch, 3SC, flip.

Row 3: 1CH, skip one stitch, 2SC, flip.

Row 4: 1CH, skip one stitch, 1SC (do not flip).

Row 5: in this round the fabric is not turned, it is knitted on one side of the previous rounds, 1CH (place a marker at this point), skip one stitch, 3SC, 1DEC between row 13 and 14, 17SC, 1DEC between Row 13 and 14, 3SC.

FIRST LEG OF THE PANTS:

Row 1: Knit 26SC from the mark that we place on the second part of the shot. 26 pts

Row 2: 26SC.

Row 3: [12SC, 1İNC] 2 times. 28 pts

Row 4 at 6:28 SC

Row 7: 7SC, 1İNC, 13SC, 1İNC, 6SC. 30 pts

Row 8 at 10:30 SC

Row 11: [14SC, 1İNC] 2 times. 32 pts

12 to 17: 28SC

Row 18: 32SL-ST.

Bind off and hide the strand.

SECOND LEG OF THE PANTS:

Row 1: Knit 18SC from the mark that we placed in the first part of the shot, 1DEC, 3SC next to the second shot, 4SC next to the first shot. 26 pts

Row 2: 26SC.

Row 3: [12SC, 1İNC] 2 times. 28 pts

Row 4 at 6:28 SC

Row 7: 7SC, 1İNC, 13SC, 1İNC, 6SC. 30 pts

Row 8 at 10:30 SC

Row 11: [14SC, 1İNC] 2 times. 32 pts

12 to 17: 28SC

Row 18: 32SL-ST.

Bind off and hide the strand.

ARMS: 3mm, make 2.

Row 1: Make a 6SC ring with yarn A.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4 at 6:18 SC.

Row 7: 16SC, 1DEC. 17 pts

Row 8: 7SC, 1DEC, 7SC, 1PP. 16 pts

Instructions for the PP: Punto Piña

[make a loop and insert the hook in the next point, make a loop and pull out a point, make a loop and pass it through two points on the hook] repeat 6 times in the same point until you have 7 points on the hook, make a loop and pass it to through the 7 points on the hook.

Row 9: 14SC, 1DEC. 15 pts

Row 10: 1DEC, 13SC. 14 pts

Row 11: 6SC, 1DEC, 6SC. 13 pts

Row 12: 11SC, 1DEC. 12 pts

Change to yarn B and begin to fill and continue to do so as you progress.

Row 13: 12SC across the back yarn.

Row 14: 4SC, 1DEC, 6SC. 11 pts

Row 15: 9SC, 1DEC. 10 pts

Row 16 at 30: 10SC.

Row 31: 1SC, 1DEC, 3SC, 1DEC, 2SC. 8Pts.

Finish filling

Row 32: 2SC, 1DEC, 2SC, 1DEC. 6Pts.

Bind off with 1SL-ST, pass the strand with the needle around the remaining 6 stitches, pull to close, bind off with a knot and hide the strand.

SPRING SLEEVE:

3mm.

Flip the arm so that we knit in the opposite direction of the fabric.

Row 1 With yarn B, knit 12SC from the yarn over in front of row 13 of the body.

Row 2 to 4: [1HDC for the front post, 1HDC for the back post] repeat throughout the round (make sure that on each round the stitches coincide in each row so that the front stitches are aligned just like the back points).

Bind off and hide the strand.

LEGS: 3mm, make 2.

Row 1: Make 4CH with yarn G, 2SC from the second chain, 3SC together at the next point, we will continue on the other side of the chains with 1SC and 1İNC. 8 pts

Row 2: 1İNC, 1SC, 3İNC, 1SC, 2İNC. 14 pts

Row 3: 1İNC, 4SC, 3İNC, 4SC, 2İNC. 20 pts

Row 4: 1SC, 1İNC, 4SC, 1İNC, 1SC, 2İNC, 1SC, 1İNC, 4SC, 1İNC, 1SC, 2İNC. 28 pts

Row 5: 1SC, 1İNC, 3SC, 1İNC, 2SC, [1İNC, 1SC] 2 times, [1SC, 1İNC] 2 times, 3SC, 1İNC, 2SC, [1İNC, 1SC] 2 times, 1SC, 1İNC. 38 pts

Note: To shape the sole of the shoe, we can cut an acetate to size and place it when it begins to fill.

Row 6 at 10:38 SC.

Row 11: 10SC, [1DEC, 3SC] 2 times, 1DEC, 16SC. 35 pts

Row 12: 11SC, 1DEC, 2SC, 1DEC, 1SC, 1DEC, 2SC, 1DEC, 11SC, 31 Pts.

Row 13: 1SC, 1DEC, 3SC, 1DEC, 5SC, 1DEC, 1SC, 1DEC, 4SC, 1DEC, 3SC, 1DEC, 2SC. 25 pts

Row 14: 3SC, 1DEC, 4SC, 1DEC, 1SC, 1DEC, 1SC, 1DEC, 4SC, 1DEC, 2SC. 20 pts

Row 15: 20SC.

Change to yarn A.

Row 16: 20SC on the back yarn.

Row 17: [3SC, 1DEC] 4 times. 16SC

Begin filling as you knit.

Row 18 at 28:16 SC.

Change to yarn C.

Row 29: 16SC on the back yarn.

Row 30 at 37:16 SC. Row 39: [1SC, 1DEC] 4 times. 8 pts

Cast off with 1SL-ST, pass the strand with the needle around the remaining 8 stitches, pull to close, cast off with a knot and hide the strand.

SOCKS: 3mm.

Row 1: Work in the same direction that the rest of the leg was worked. With yarn G, knit 16SC from the strand in front of row 16 of the body.

Row 2 to 4: [1HDC for the front post, 1HDC for the back post] repeat throughout the round (make sure that on each round the stitches coincide in each row so that the front stitches are aligned just like the back points). Amigurumi Damian Boy Free

Bind off and hide the strand.

SHOES: 3mm, make 2.

This is done in 3 parts, sole, body and tongue.

Sole:

Row 1: Make 6CH with yarn C, 4SC from the second chain, 3SC together at the next point, we will continue on the other side of the chains with 3SC and 1İNC. 12 pts

Row 2: 1İNC, 3SC, 3İNC, 3SC, 2İNC. 18 pts

Row 3: 1İNC, 6SC, 3İNC, 6SC, 2İNC. 24 pts

Row 4: 1SC, 1İNC, 6SC, 1İNC, 1SC, 2İNC, 1SC, 1İNC, 6SC, 1İNC, 1SC, 2İNC. 32 pts

Row 5: 1SC, 1İNC, 4SC, 1İNC, 3SC, [1İNC, 1SC] 2 times, [1SC, 1İNC] 2 times, 4SC, 1İNC, 3SC, [1İNC, 1SC] 2 times, 1SC, 1İNC. 42 pts

Row 6: 42SC.

Row 7: SL-ST loose.

Body:

Now we will work closing Rows with 1SL-ST.

Row 8: 1CH, 42SC for the chain that forms behind the SL-STs of the previous round, close with 1SL-ST.

Row 9: 1CH, 42SC, close with 1SL-ST.

Change to yarn H.

Row 10: 1CH, 42SC, close with 1SL-ST.

Change to yarn C.

Row 11: 1CH, 42SC, close with 1SL-ST.

Count 6 points from the center of the sole to the right and place a marker, from there the next Row will start (you can start at point 12 from the starting point).

Row 12: From the back strand 1SC, 1HDC, 2DC together, 5DC, 2DC together, 1HDC, 1SC. 13 pts

Bind off and change to yarn I, to start working round-trip.

Row 13: 1CH, 31SC, flip.

Row 14: 1CH, 1İNC, 29SC, 1İNC, flip. 33 pts

Row 15: 1CH, 11SC, [1DEC, 3SC] 2 times, 1DEC, 10SC, flip. 30 pts

Row 16: 1CH, 10SC, 1DEC, 2SC, 1DEC, 2SC, 1DEC, 10SC, flip. 27 pts

Row 17: 1CH, 12SC, 1DEC, 13SC. 26 pts

Row 18: 1CH, 1DEC, 22SC, 1DEC, flip. 24 pts

Row 19: 1CH, 1DEC, 20SC, 1DEC, flip. 22 pts

Lower 6SL-ST into your left hand from the fabric to start making the tab over the stitches on row 12.

Tongue:

Row 1: 1CH, for the yarn over after 13SC, flip.

Row 2: 1CH, 1DEC, 9SC, 1DEC, flip.

Row 3: 1CH, 5SC, 1DEC, 4SC, flip.

Row 4: 1CH, skip one stitch, 7SC, skip one stitch, 1SC, flip.

Row 5: 1CH, skip one stitch, 1HDC, 3DC, 1HDC, skip one stitch, 1SC, flip.

Rotate SL-ST around the body of the shoe and the sides of the tongue.

Bind off and hide the strand.

Shoe details:

With yarn C make an 8SC ring, close and leave one strand to join. Embroider the star with black yarn, sew to the outside of the shoe.

For the shoelaces, weave two cords with chains of the necessary size.

FOX FACE: 3mm.

Inner part:

Row 1: 6SC magic ring with stamen J.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4: [2SC, 1İNC] 6 times. 24 pts

Row 5: Do 1PP as explained at the end, 2CH, 1SL-ST at the same point of the PP, 6SC, 1PP, 2CH, 1SL-ST at the same point of the last PP.

Finish off leaving a strand to join the chest part of the sweater leaving the PP that will be the inner part of the ears centered at the top, these in turn are left loose to accommodate later. Amigurumi Damian Boy Free

External part:

Row 1: 4SC magic ring with H stamen change to E stamen making 1SL-ST to close the ring.

Row 2: 2CH, 2DC, 2CH, flip. 2Pts.

Row 3: [2DC together] 2 times, 2CH and flip. 4 pts

Row 4: [2DC together] 4 times and flip. 8 pts

Row 5: do 5CH, skip 1 stitch, 6SC, do 5CH, skip 1 stitch, 1SL-ST, 1CH and flip.

Row 6: In the first space of the chains do [1SC, 1HDC, 1DC, 1HDC, 1SC], 6SC, in the second space of the chains do [1SC, 1HDC, 1DC, 1HDC, 1SC].

Finish off leaving one strand to join.

Place the orange part on the bone-colored part, hide the black strand of the nose at the back and embroider the eyes with a basting, remove the inner part of the ears through the hole that formed in the chains, sew so that you are no longer able to get in and finish attaching the last piece to the chest. Amigurumi Damian Boy Free

Row 38: [2SC, 1DEC] 4 times. 12 pts

Yorum yapın