Amigurumi Heart Bunny Free Crochet Pattern

We share a cute amigurumi heart bunny free pattern for you. You can visit our website for free amigurumi patterns. Amigurumi Heart Bunny

Amigurumi Heart Bunny Materials:

Can be knitted from any yarn

I have – the main one –

Himalaya “Dolphin Baby” (% 100 Micro Polyester, 90 m / 100 g)

and Katia “Velvet Fine” (100% polyester, 160 m / 50 g)

Eyes 10 and 12mm.

Wire optional (pink Zaya on the frame).

Extra yarn for spout and trim –

– Gazzal “Baby Cotton” (60% cotton, 40% polyacrylic, 165 m / 50g)

– and Katia “Velvet Fine” is a different color.

Legend:

sc – single crochet.

dc – double crochet.

inc dc – double crochet.

sl-st – connecting post.

ch – air loop.

We knit in a spiral, use a marker. Head, ears and legs dangle.

Lower legs.

main thread, marker runs down the middle, back.

1.6sc into magic ring. (6)

2. (inc) * 6. (12)

3. (1sc, inc) * 6. (eighteen)

4. 5sc, (fluffy column (additional thread – 3dc in one column,), main thread – sc in the next column) * 4, 5sc.

Lush column with one crochet

We knit 3 columns with one crochet without completing the last stage, we capture the working

thread and knit all the loops together.

5.5sc, (dec) * 4, 5sc. (fourteen)

6.14sc. (fourteen)

7.4sc, (inc) * 6, 4sc. (20)

8.4sc, (1sc, inc) * 6, 4sc. (26)

9 – 11. Three rows 26sc. (26)

12.5sc, (inc, 3sc) * 4, inc, 4sc. (31)

On the left foot – do not tie the last 4 columns, cut the thread, fasten.

On the right – knit 3sc, do not cut the thread.

We apply the left one to the pava and knit with a separate thread together 5sc, thread

cut, fasten, fill.

I inserted a button into the sole of the foot.

We continue to knit the little body, the marker goes down the middle of the back.

Fill in as you knit.

1.set the marker, 3sc, (inc, 1sc) * 3, inc, 9sc, (inc, 2sc) * 2, inc – on the left foot, inc, (2sc, inc) * 2, 9sc, inc, (1sc, inc) * 3, inc, 3sc – right (66)

2.66sc. (66)

3.3sc, (inc, 2sc) * 3, 42sc, (2sc, inc) * 3, 3sc. (72)

4 – 8 five rows 72sc. (72)

9.5sc, dec, (10sc, dec) * 5.5sc. (66)

10.66sc. (66)

11. (9sc, dec) * 6. (60)

12.4sc, dec, (8sc, dec) * 5.4sc. (54)

13.54sc. (54)

14. (7sc, dec) * 6. (48)

15.48sc. (48)

16.3sc, dec, (6sc, dec) * 5.3sc. (42)

17.42sc. (42)

18. (5sc, dec) * 6. (36)

19.36sc. (36)

20.2sc, dec, (4sc, dec) * 5.2sc. (thirty)

21.30sc. (thirty

22. (3sc, dec) * 6. (24)

23.24sc. (24)

24. (dec, 2sc,) * 6. (eighteen)

25 – 32. Eight rows 18sc. (eighteen)

We knit holes for the upper legs,

33.3sc, 3ch, skip 3 columns, 6sc, 3ch, skip 3 columns, 3sc.

34.3sc, 3sc on ch, 6sc, 3sc on ch, 3sc. (eighteen)

35 – 37 three rows 18sc. (eighteen)

Cut the thread, fix it.

Front legs.

The main thread, you can not follow the marker, do not fill.

1. Attach the thread to the first, of the missing, column 3sc, 1sc between rows, 3sc along ch, 1sc between rows. (8)

2 – 21. Twenty rows of 8sc. (20)

22. inc, 3sc, inc, 3sc. (ten)

23. inc, 4sc, inc, 4sc. (12)

24.2sc, inc, 5sc, inc, 3sc. (fourteen)

We knit the, palm, paws with a heart, make sure that the middle of the, palms, on both

paws was the same.

 Divide in half

 We skip 6 columns, in the seventh –

 and. inc, 5sc, inc. (nine)

 b. 9sc. (nine)

 from. (dec) * 4.1sc. Cut the thread, tighten, fasten and hide.

 We attach the thread to the separation column and knit a, b, c.

Spout.

The pink nose and body are made of katya, the hook is smaller.

We start with a finishing thread for the spout.

1.6sc into magic ring. (6)

2. (inc) * 6. (12)

3. (1sc, inc) * 6. (eighteen)

4.18sc. (eighteen)

5.18sc. (eighteen)

6. (1sc, dec) * 6. (12) next row with main thread.

Extra yarn spout.

1.6sc into magic ring. (6)

2. (inc) * 6. (12)

3 – 4. Two rows 12sc. (12)

5. (dec) * 6. (6)

6. Change the color (inc) * 6. (12)

Continuing the head, the marker runs along the chin and in the middle of the back of the head.

1. (1sc, inc) * 6. (eighteen)

2.3sc, (inc) * 3, 6sc, (inc) * 3, 3sc. (24)

3. (3sc, inc) * 6. (thirty)

4.6sc, (inc) * 3, 12sc, (inc) * 3, 6sc. (36)

5. (5sc, inc) * 6. (42)

6.9sc, (inc) * 3, 18sc, (inc) * 3, 9sc. (48)

7. (7sc, inc) * 6. (54)

8. (8sc, inc) * 6. (60)

9. (9sc, inc) * 6. (66)

10. (10sc, inc) * 6. (72)

11. (11sc, inc) * 6. (78)

12. (12sc, inc) * 6. (84)

13.37sc, (inc, 2sc) * 3, inc, 37sc. (88)

14.88sc. (88)

15.3sc, (dec, 2sc) * 5, dec, 12sc, (inc, 2sc) * 4, inc, 12sc, (dec, 2sc) * 5, dec, 4sc. (81)

16.dec, 79sc. (80)

17 – 18 two rows 80sc. (80)

19. (2sc, dec) * 4, 48sc, (dec, 2sc) * 4. (72)

Neck opening.

20.70sc, 2ch, skip 2 columns. (70)

21.2ch, skip 2 columns, 68sc, 2sc under ch. (68)

22.2sc under ch, 70sc. (72)

23.72sc. (72)

24. (10sc, dec) * 6. (66)

Lug holes.

25.29sc, 3ch, skip 3 columns, 3sc, 3ch, skip 3 columns, 28sc. (60)

26.29sc, 3sc in ch, 3sc, 3sc in ch, 28sc. (66)

27. (9sc, dec) * 6. (60)

28.4sc, dec, (8sc, dec) * 5, 4sc. (54)

29. (7sc, dec) * 6. (48)

30.3sc, dec, (6sc, dec) * 5, 3sc. (42)

31. (5sc, dec) * 6. (36)

32.2sc, dec, (4sc, dec) * 5, 2sc. (thirty)

33. (3sc, dec) * 6. (24) fill in.

We tie the last rows after all the ties:

34. (2sc, dec) * 6. (eighteen)

35. (1sc, dec) * 6. (12)

36. (dec) * 6. (6) cut the thread, tighten, fasten and hide.

Ears are the main thread, you can not follow the marker, do not fill.

We attach the thread to the first of the skipped loops,

1 – 5. Five rows 6sc. (6)

6.inc, 2sc, inc, 2sc. (8)

7 – 9. Three rows of 8sc. (8)

10.inc, 3sc, inc, 3sc. (ten)

11 – 13. Three rows 10sc. (ten)

14.inc, 4sc, inc, 4sc. (12)

15 -17. Three rows of 12sc. (12)

18.inc, 5sc, inc, 5sc. (fourteen)

19 – 21. Three rows 14sc. (fourteen)

22. inc, 6sc, inc, 6sc. (sixteen)

23 – 30. Eight rows 16sc. (sixteen)

31. inc, 7sc, inc, 7sc. (eighteen)

32. inc, 8sc, inc, 8sc. (20)

33. inc, 9sc, inc, 9sc. (22)

34. inc, 10sc, inc, 10sc. (24)

35.24sc. (24)

We divide the ear in half, the last 24th column should be in the middle of the ear, if not, then knit the required number of columns.

We continue the first half of the ear –

1. Skip 11 columns, inc, 10sc, inc. (fourteen)

2.14sc. (fourteen)

3. (Dec) * 7. (7) cut, tighten and hide the thread.

We also knit the second half of the ear.

Hearts for the ears and under the eyes are large.

İnto magic ring we type – 3ch, 4inc dc, 3dc, ch, dc, ch, 3dc, 4inc dc, 3ch, sl-st.

Pull the amigurumi into the ring.

Can be tied behind the back walls with single crochet posts.

Hearts for paws and eyes are small.

İnto magic ring we dial – 2ch, 4dc, 3sc, ch, dc, ch, 3sc, 4dc, 2ch, sl-st.

Pull the amigurumi into the ring.

Tail.

1.6sc into magic ring

2. (inc) * 6. (12)

3. (1sc, inc) * 6. (eighteen)

4. (2sc, inc) * 6. (24)

5. (sc, dec) * 3, (inc) * 6, (dec, sc) * 3. (24)

6.24sc.

We fill in the process of sewing, (with increments to the bottom, between 4 and 5 rows from the connecting paws.)

We outline the location of the eye and mouth.

We pull each “eye” separately through the hole for the frame.

We pull each corner of the mouth separately through the not tied hole on the crown.

Sew on hearts, eyes. We embroider the mouth and eyebrows.

Eyes – basting, between 6 and 7 rows, 12 columns between the peephole.

Mouth – basting, between 9 and 10 rows, 11 columns between basting.

Supplement for knitting a little bunny based on Zaya Serdeshna.

We knit the hind legs and body up to the 9th row in the same way.

10 – 14 five rows 66sc. (66)

15 (9sc, dec) * 6. (60)

16 60sc. (60)

17 4sc, dec, (8sc, dec) * 5, 4sc. (54)

18 (7sc, dec) * 6. (48)

19 3sc, dec, (6sc, dec) * 5, 3sc. (42)

20 (5sc, dec) * 6. (36)

21 36sc. (36)

22 2sc, dec, (4sc, dec) * 5.2sc. (thirty)

23 30sc. (thirty)

24 (3sc, dec) * 6. (24)

25 – 26 two rows 24sc. (24)

27 knit a hole for the feet, 4sc, 4ch – skip 4 columns, 8sc, 4ch – skip 4 columns, 4sc. (24)

28 4sc, 4sc on ch, 8sc, 4sc on ch, 4sc. (24)

29 sc, dec, (2sc, dec) * 5, sc. (eighteen)

30 18sc. (eighteen). We fix the thread, cut it off.

Upper paws.

We knit in a spiral, you can not follow the marker.

1 Along left sts 4sc, sc between rows, 4sc along ch, sc between rows. (ten)

2 – 7 six rows 10sc. (ten)

8 (front decrements) (dec) * 2, 6sc. (8)

9 (inc) * 2, 6sc. (ten)

10 10sc. (ten)

11 4sc, inc, 5sc. (eleven)

12 inc, 10sc. (12)

13 – 17 five rows 12sc. (12)

18 (dec) * 6. (6). Cut the thread, pull together and hide.

Ears

We knit in a spiral, you can not follow the marker.

1.6sc into magic ring. (6)

2. (inc) * 6. (12)

3.12sc. (12)

4. (sc, inc) * 6. (eighteen)

5.18sc. (eighteen)

6. (2sc, inc) * 6. (24)

7.24sc.

8. (3sc, inc) * 6. (thirty)

9 – 11 three rows 30sc. (thirty)

12. (3sc, dec) * 6. (24)

13 – 14 two rows of 24sc. (24)

15 (2sc, dec) * 6. (eighteen)

16 – 17 two rows 18sc. (eighteen)

18 (sc, dec) * 6. (12)

19 – 20 two rows 12sc. (12)

Cut off and fasten the thread.

To decorate the middle of the ear, we collect a chain of 21 loops,

from the second from the hook 20sc, turn, in each column (ch, sl-st) * 20.

Fold in half and sew to the middle of the ear.

Head.

We knit in a spiral, follow the marker, runs along the chin and the middle of the back

parts of the head.

We start with the spout with the same thread of a different color.

1 6sc into magic ring. (6)

2 (inc) * 6. (12)

3 – 4 two rows 12sc. (12)

5 (dec) * 6. (6) change the color to the main one.

1 (inc) * 6. (12)

2 (sc, inc) * 6. (eighteen)

3 3sc, (inc) * 3.6sc, (inc) * 3.3sc. (24)

4 (3sc, inc) * 6. (thirty)

5 6sc, (inc) * 3.12sc, (inc) * 3.6sc. (36)

6 (5sc, inc) * 6. (42)

7 9sc, (inc) * 3.18sc, (inc) * 3.9sc. (48)

8 (7sc, inc) * 6. (54)

9 12sc, (inc) * 3.24sc, (inc) * 3.12sc. (60)

10 (9sc, inc) * 6. (66)

11 – 13 three rows 66sc. (66)

14 we knit a hole (for the frame) on the neck,

 (3sc, dec) * 3, 36sc, (dec, 3sc) * 2, dec, sc, 2ch – skip 2 columns. (58)

15 2ch – skip 2 columns, 56sc, 2sc for ch. (58)

16 2sc on ch, 58sc. (60)

17 60sc. (60)

18 in this row we knit in half of the ears.

 22sc, 6sc with one half of the lug, 4sc, 6sc with one half of the second lug,

 22sc. (60)

19 – 21 three rows 60sc. (60)

22 4sc, dec, (8sc, dec) * 5.4sc. (54)

23 54sc. (54)

24 (7sc, dec) * 6. (48)

25 3sc, dec, (6sc, dec) * 5.3sc. (42)

26 (5sc, dec) * 6. (36)

27 2sc, dec, (4sc, dec) * 5,2sc. (30)

28 (3sc, dec) * 6. (24)

Fill the head, tie the eyelet after tightening and sewing on.

29 sc, dec, (2sc, dec) * 5, sc. (eighteen)

30 (sc, dec) * 6. (12)

31 (dec) * 6. (6) cut, tighten and hide the thread.

We do each tightening separately.

We place the basting for the tightening.

The mouth from the nose down between 8-9 rows, 5 columns between the basting.

Eyes on either side of the nose between 6-8 rows, pull through the neck hole.

1 A needle with a strong thread is inserted into the hole for the neck and brought out into the eye basting

(farthest from the nose), we introduce into the second outline of the eye (closer to the nose) and output into

hole for the neck, we tighten both threads well and tie them into knots.

In the same order, we tighten the second eye.

Sew the eyes through not tied th hole of the toe of the head.

2 We pull both corners of the mouth over the toe of the head.

We introduce a needle with a strong thread into the opening of the toe of the head and bring it out into the basting of the mouth,

we insert the needle into the next column and bring it out into the opening of the toe of the head.

We pull both strings and tie on knots

In the same order, we tighten the other corner of the mouth.

We supplement the filler in the head and tie it, embroider the mouth.

We sew the head to the calf.

May my toy bring joy to your children !!!

Handicraft girls, knit with pleasure and celebrate

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *