Amigurumi Fox Mister Darcy Free Pattern

“Fox Mister Darcy” We share the amigurumi fox free pattern for you on our website. You can browse our site for new patterns.

Recommended materials and tools:

1.Yarn.

When knitting, I used:

* YarnArt Jeans (skein weight: 50 g., Thread length: 160 m, Composition: 55% cotton, 45% polyacrylic, Manufacturer: Turkey)

Colors: N 23 – orange, N 79 – light green, N 63 – dark green, N 28 – black, N 01 – white, N 50 – dark purple, N 72 – light purple, N 67 – yellow, N 74 – pink

* KAMTEX KT “COTTON GRASS” (skein weight: 100 gr.,

Thread length: 220 m, Composition: 65% cotton, 35% polyamide, Manufacturer: Russia)

Color N 205 is white.

2. Hook N 1.75

3. Filler – holofiber, sintepon

4. Eyes with a diameter of 1 cm.

5. White felt to decorate the eyelet (I have sequins)

6. The spout is 9 mm long.

7. Basting needles

8. Stitching needle

9. Scissors

10. Sewing threads

11. Floristic wire with a diameter of 0.55 mm and a length of 20 cm.

12. Ribbon 1 cm wide about 25 cm long

13. Cardboard

14. Glue

15.2 buttons with a diameter of 5 mm

Legend:

sc – single crochet

ch – air loop

inc – increase = 2 sc in one loop

dec – decrease = knit 2 sc together

sl-st./SL-ST – connecting column (half-column without crochet)

DC – double crochet

CC2H – double crochet

FLO – front half loop

HDC – half double crochet

ch. – lifting loop

(…) – the number in brackets means the number of loops in a row

(…) * N – repeat N times what is indicated in brackets

The size of the finished toy (with ears) using these materials is 19 cm.

Flower arrangement – 7 cm.

1.HEAD

We start knitting with orange yarn.

We fill the detail in the knitting process.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5.) (3 sc, inc) * 6 (30)

6.) 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)

7.) (5 sc, inc) * 6 (42)

8.) – 10.) 42 sc (42, 3 rows)

11.) 1 sc, (3 sc, inc) * 5, 1 sc, (3 sc, inc) * 5 (52)

We change the yarn for KAMTEX KT “COTTON GRASS”

12.) 1 sc, (4 sc, inc) * 5, 1 sc, (4 sc, inc) * 5 (62)

13.) 1 sc, (5 sc, inc) * 5, 1 sc, (5 sc, inc) * 5 (72)

14.) 72 sc (72)

15.) 1 sc, (5 sc, dec) * 5, 1 sc, (5 sc, dec) * 5 (62)

16.) 1 sc, (4 sc, dec) * 5, 1 sc, (4 sc, dec) * 5 (52)

17.) 1 sc, (3 sc, dec) * 5, 1 sc, (3 sc, dec) * 5 (42)

18.) (5 sc, dec) * 6 (36)

19.) 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)

20.) (3 sc, dec) * (24)

21.) 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)

22.) (1 sc, dec) * 6 (12)

We make 2 decreases and tighten the hole.

How to pull off the hole can be found in the appendix to the MK.

DESCRIPTION:

2. EARS

We start knitting with black yarn.

We do not fill the part.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

Change the color of the yarn to orange.

3.) 12 sc (12)

Change the color of the yarn to black.

4.) (1 sc, inc) * 6 (18)

Change the black yarn to orange and continue knitting.

5.) 18 sc (18)

6.) 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

7.) 24 sc (24)

8.) (3 sc, inc) * 6 (30)

9.) 30 sc (30)

10.) 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)

11.) 36 sc (36)

Fold the piece in half and knit 18 sc on both sides.

3. LEGS (2 PARTS)

RIGHT LEG

We start knitting with black yarn.

We fill the part in the knitting process.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) – 5.) 18 sc (18, 2 rows)

6.) 6 sc, (dec) * 3, 6 sc (15)

7.) 6 sc, decrease from 3 sts, 6 sc (13)

I explain how to make a decrease from three loops in the Appendix to the MK.

8.) 13 sc (13)

Change the color of the yarn to orange. You will find how to change the color in the appendix to the MK.

9.) – 13.) 13 sc (13, 5 rows)

Knit an additional 5 sc, fix the thread and cut.

LEFT LEG

We start knitting with black yarn.

We fill the part in the knitting process.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) – 5.) 18 sc (18, 2 rows)

6.) 6 sc, (dec) * 3, 6 sc (15)

7.) 6 sc, decrease from 3 sts, 6 sc (13)

I explain how to make a decrease from three loops in the Appendix to the MK.

8.) 13 sc (13)

Change the color of the yarn to orange. You will find how to change the color in the appendix to the MK.

9.) – 13.) 13 sc (13, 5 rows)

Knit an additional 11 sc, do not cut the thread, continue knitting.

4. BODY

We connect the legs. Details of how to connect the legs is considered in the Appendix to the MK.

We continue to knit.

We collect 7 ch, we knit:

13 sc – on the right leg,

7 sc – by transition,

13 sc – on the left,

7 sc – by transition,

13 sc – on the right.

We put a marker, mark the beginning of the first row. We should have 40 stitches in a row.

1.) (9 sc, inc) * 4 (44)

2.) 5 sc, inc, (10 sc, inc) * 3, 5 sc (48)

3.) (inc, 1 sc) * 3, 17 sc, (inc, 1 sc) * 3, 19 sc (54)

4.) – 8.) 54 sc (54, 5 rows)

9.) 4 sc, dec, 25 sc, dec, 21 sc (52)

10.) 17 sc, dec, 24 sc, dec, 7 sc (50)

11.) 4 sc, dec, 23 sc, dec, 19 sc (48)

12.) 16 sc, dec, 22 sc, dec, 6 sc (46)

13.) 4 sc, dec, 21 sc, dec, 17 sc (44)

14.) 14 sc, dec, 20 sc, dec, 6 sc (42)

15.) 3 sc, dec, 19 sc, dec, 16 sc (40)

16.) 13 sc, dec, 18 sc, dec, 5 sc (38)

17.) 3 sc, dec, 17 sc, dec, 14 sc (36)

18.) 12 sc, dec, 16 sc, dec, 4 sc (34)

19.) 3 sc, dec, 15 sc, dec, 12 sc (32)

20.) 11 sc, dec, 14 sc, dec, 3 sc (30)

21.) 3 sc, dec, 13 sc, dec, 10 sc (28)

22.) 9 SC, DEC, 12 SC, DEC, 3 SC (26)

Knit an additional 11 sc, SL-ST, fix the thread, cut off.

5. HANDLES (PART 2AND)

We start knitting with black yarn.

We fill from 1 to 6 rows.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) – 4.) 12 sc (12, 2 rows)

5.) 3 sc, popcorn (4 DC with common base and one top), 8 sc (12)

I show in detail how to knit popcorn in the Appendix to the MK.

6.) (2 sc, dec) * 3 (9)

7.) 9 sc (9)

Change the yarn to orange.

8.) – 19.) 9 sc (9, 12 rows)

Knit an additional 2 sc, fold the piece in half and knit by both sides.

6. TAIL

We start knitting with white yarn. We do not fill the part.

1.) 6 sc into magic ring (6)

2.) (2 sc, inc) * 2 (8)

3.) (3 sc, inc) * 2 (10)

Change the color of the yarn to orange.

4.) 2 sc, inc, 4 sc, inc, 2 sc (12)

Change the color of the yarn to white.

5.) (2 sc, inc) * 4 (16)

Change the color of the yarn to orange.

6.) (3 sc, inc) * 4 (20)

7.) – 11.) 20 sc (20, 5 rows)

12.) (3 sc, dec) * 4 (16)

13.) – 14.) 16 sc (16, 2 rows)

15.) (dec, 6 sc) * 2 (14)

16.) – 17.) 14 sc (14, 2 rows)

18.) (5 sc, dec) * 2 (12)

19.) – 20.) 12 sc (12, 2 rows)

21.) (dec, 4 sc) * 2 (10)

22.) – 23.) 10 sc (10, 2 rows)

Knit an additional 2 sc, fold the piece in half and knit by both sides 5 sc.

Design and assembly:

1) Glue the spout on the 12-13th row.

2) Cut out 2 circles with a diameter of 13 – 14 mm from felt.

We glue eyes 1 cm in diameter on felt circles on the side as shown in the photo. Using a black felt-tip pen, decorate the eyes (draw around)

4) We make a peephole tightening. Mark points from N 1 to N 4 as shown in the photo.

3) Glue the eyes on the 10-12th row of the head at a distance of 8 sc between them.

We use a needle and orange thread for sewing.

The process is described in detail in the Appendix to the MC.

5) We embroider a smile. Do not tighten the thread!

We mark the points with basting needles as shown in the photo.

Point N 1 is between 13 and 14 near the head,

N 2 – between 14 and 15 rows, N 3 – between 14 and 15 rows at a distance of 3 sc from point 2, N 4 – between 15 and 16 rows (mark it in the middle of points 3 and 2). Points N 5 and 6 are marked in the same way as points 3 and 4

6) We embroider the eyebrows. Mark the points with basting needles.

Upper (N 2 and N 3) between 5 and 6 row at a distance of 5 sc between them.

The lower ones (N 1 and N 4) are between 8 and 9 row at a distance of 16 sc between them as shown in the photo on the next page.

We thread a black thread into the needle in two threads, insert the head into the last row, fix the thread and insert the needle in order from N 1 to N 4. Draw the needle next to the last row of the head, fix and cut off.

In a needle with a large eye we thread black yarn into one thread, insert it into the last row of the head, leave a small tail and bring the needle to point N 1, then to N 2, to N 3, to N 4, to N 2, to N 4 , at N 5, at N 6, at N 2 and again at point N 6. We bring out the needle next to the last row of the head, tie a knot, cut off the tips.

7) Sew on the ears.

In order to give the shape we need, we count 5 sc from the last (18th) sc and bend the ear. For the left ear, bend it to the left, for the right one – to the right.

We fix the ears with basting needles in a semicircle as shown in the photo. We place the front part from 4 to 6 rows of the head, and the back – from 4 to 11 rows.

We use a needle with an orange thread for sewing.

Sew on the ears for both walls as shown in the photo.

9) Sew the head to the body.

With basting needles we fix the body between the 18th and 19th row of the head.

We use a needle with orange thread for sewing (see Appendix for how to fix the thread on the knitted product) and sew on both half-loops (see Appendix)

8) Well, and the final part of the muzzle design.

We comb from 12 to 22 rows of the head with a brush (comb) for cats  As an alternative – the hard part of the Velcro.

10) Attach the handles.

We fix the hands with basting needles between 20 and 21 rows of the body and sew for both half-loops using a needle and an orange sewing thread.

11.) Pants

We knit the part from the bottom up. We start knitting with light green yarn.

We collect a chain of 40 ch., With the help of sl-st we close it in a ring and knit in a spiral.

1.) 1 ch., 40 sc (40)

2.) 40 sc (40)

3.) (9 sc, inc) * 4 (44)

4.) 5 sc, inc, (10 sc, inc) * 3, 5 sc (48)

5.) (11 sc, inc) * 4 (52)

6.) (25 sc, inc) * 2 (54)

Next, when knitting popcorn, change the color to purple. I consider in detail how to change the color when crocheting in a spiral in the Appendix to the MK. We knit the purple thread on the seamy side.

7.) (8 sc, popcorn) * 6 (54)

How to knit popcorn (4 DC with a common base and one vertex) I show in detail in the Appendix to the MK.

8.) – 9.) 54 sc (54)

10.) 4 sc, popcorn, (8 sc, popcorn) * 5, 4 sc (54)

11.) (25 sc, dec) * 2 (52)

12.) 12 sc, dec, 24 sc, dec, 12 sc (50)

13.) popcorn, 8 sc, popcorn, 7 sc, popcorn, 8 sc, (popcorn, 7 sc) * 3 (50)

14.) (23 sc, dec) * 2 (48)

15.) (10 sc, dec) * 4 (44)

16.) (20 sc, dec) * 2 (42)

Knit SL-ST, fix the thread, cut off.

Form a loop of dark green yarn and knit a row of SL-ST on the first row and between rows 15 and 16 as shown in the photo.

12.) Pants straps (2 parts)

We use light green yarn. We cast on 19 ch., From the second loop from the hook we knit 18 sc, fix the thread, cut off.

We fix the straps with basting needles as shown in the photo (from behind we tuck them under the pants).

We fix it in front with 2 yellow p5mm coils and purple thread needles for sewing.

Sew / glue the shoulder straps and back.

We put on the pants on the body, sew between the legs as shown in the photo using a needle and dark green sewing thread.

13.) Hat

We use light green yarn.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) Knit by the jumper: 18 sc (18)

5.) 2 sc, dec, (4 sc, dec) * 2, 2 sc (15)

6.) (3 sc, dec) * 3 (12)

7.) (inc) * 12 (24)

8.) (1 sc, inc) * 12 (36)

Knit SL-ST, fix the thread, cut off.

Form a loop of dark green yarn and knit a row of sl-st. between the 5th and 6th row of the cap.

We glue / sew on from 1 to 3 rows of the head.

14.) Bow

We use dark green yarn.

We collect a chain of 22 ch. and from the second loop from the hook we knit 21 sc. We fix the thread, cut it off.

We tie the resulting ponytails into a knot.

Fold both ends towards the middle as shown in

photo and sew with a needle with dark green thread for sewing.

We wrap with light green yarn 3-4 times in the middle and tie the ends on the seamy side.

We glue / sew a bow in the middle

trunk in the neck.

15) Sew on the tail.

We fix it with basting needles obliquely as shown in the photo. Sew on with a needle and orange sewing thread for both half loops. In order for our ponytail to hold securely, sew / glue at the point marked with a basting needle as shown in the second photo.

16) Flower arrangement.

Flower basket.

We use yellow yarn.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5.) (3 sc, inc) * 6 (30)

6.) 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)

We circle the part on cardboard, cut out the bottom.

7.) Knit by the jumper: 36 sc (36)

8.) – 16.) 36 sc (36, 9 rows)

Knit SL-ST, fix the thread, cut off.

We insert our bottom inside.

Top.

We use light green yarn.

1.) 6 sc into magic ring (6)

2.) 6 inc (12)

3.) (1 sc, inc) * 6 (18)

4.) 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5.) 24 sc (24)

6.) (3 sc, inc) * 6 (30)

7.) 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)

Knit SL-ST, fix the thread, cut off.

Flower (11 pcs)

We start knitting with yellow yarn.

1.) 6 sc into magic ring, closed in a ring with sl-st. in the first loop (6)

Change the color to purple. We knit 6 petals, in each loop of the CA: (2 ch., 2 DC, 2 ch., Sl-st. In the same loop, sl-st. In the next) * 6

After tying the last petal, knit sl-st. in the first loop, fix the thread, cut it off.

We fill the basket and sew to the top.

We fix the flowers with basting needles and glue them, cut off the tails. We wrap with a ribbon, tie a bow.

We knit hearts (2 pcs)

We knit with pink yarn.

İNTO MAGİC RİNG: (ch) * 2, (CC2H) * 3, (DC) * 2, CC2H, (DC) * 2, (CC2H) * 3, (ch) * 2, SL-ST into magic ring.

We fix the thread, cut it off.

Cut a 10 cm long wire for each heart. Fix the wire at the bottom of the heart. On the wrong side, you can additionally fix it with glue. We wrap a pencil around it, stretch it a little. Paste between the flowers at the top. Can be additionally fixed with glue.

Hurrah! Mister Darcy is ready

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *