Amigurumi Doll Sofia Free in a hat with earflaps We continue to share Amigurumi Doll Sofia Free toys. here is the Doll Sofia Free here
Materials and tools:
– ALIZE – 50 g (300 m / 50 g).
– Yarn for clothing sweets online (white yarn – 15g, green yarn – 15g)
– yarn for pillows approx. 15g baby Himalayan dolphin 100g / 100m
– hook 1.5 mm.
– filler
– Pins with disks with a diameter of 15 mm
– Eyelashes, pastel crayons for toning.
– glue
– 1 needle, 1 button
abbreviation:
Sc – single crochet
Ch –air loop
Dec – decrease
İnc – increase
Dc double crochet
Hdc half crochet
(…) x repeat x number of times
Sleeping doll Sofia. She sees colorful and good dreams like children in all over the world. That is why you do not want open your eyes early in the morning.
The doll size is 15 cm at use of these materials. The head is attached to the body cotter pin that allows the doll to rotate the head.
A few tips:
– When crocheting, I always use the smallest size of the hook that is indicated on the threads. For instance, if a 3mm hook is recommended, I use a 1.5mm hook. This avoids large holes in the canvas, the doll becomes more accurate again.
1. All parts are connected in a spiral. This means that the round will not be completed by SP.
2. Use a marker. A small thread (a different color than your work thread) will help you count the number of rows.
Just place it at the beginning of the row on top of the thread.
HEAD
1.6 Sc in the Magic ring.
2. 6İnc = 12
3. (1Sc, 1 İnc) x6 = 18
4. (2Sc, 1 İnc) x6 = 24
5. (3Sc, 1 İnc) x6 = 30
6. (4Sc, 1 İnc) x6 = 36
7. (5Sc, 1 İnc) x6 = 42
8. (6Sc, 1 İnc) x6 = 48
9. (7Sc, 1 İnc) x6 = 54
10. (8Sc, 1 İnc) x6 = 60
11-16. = 60Sc
17. 20Sc, (1 İnc, 1Sc) x3, 3Sc, 3 Dc 1 loop in 1 loop (this will be the nose), 3Sc, (1Sc, 1 İnc) x3, 21Sc = 66 See photo below.
18.20Sc, (1 İnc, 2Sc) x3, 3Sc, 1Dec, 2Sc (2Sc, 1 İnc) x3, 19Sc, 1 Dec = 70
19-23. = 70Sc
24.20Sc, (1 Dec, 2Sc) x3.1 Dec, 2Sc, 1Dec (2Sc, 1 Dec) x3, 20Sc = 62
25.1Dec, 18Sc, (1 Dec, 1Sc) x3.4Sc, (1Sc, 1 Dec) x3, 18Sc, 1 Dec = 54
26. (7Sc, 1 Dec) x6 = 48
27. (6Sc, 1 Dec) x6 = 42
28. (5Sc, 1 Dec) x6 = 36
29. (4Sc, 1 Dec) x6 = 30
30. (3Sc, 1 Dec) x6 = 24 Fill
31. (2Sc, 1 Dec) x6 = 18
32. (lSc, 1 Dec) x6 = 12
Place the metal disk on the cotter pin, then install the wooden disk. Install the cotter pin with the disks in the head and fasten it. The cotter pin itself should be outside, as you can see in the photo below.
33. 6 Dec, pull, thread cut and clos
BODY
1. 6 Sc in the Magic ring, put the marker.
2. 6İnc = 12
3. (1Sc, 1 İnc) x6 = 18
4. (2Sc, 1 İnc) x6 = 24
Pass the cotter pin through the middle of the case, insert a wooden disc, then a metal disc, bend the cotter pin and fasten with his pliers.
5-6.24Sc
7. (3Sc, 1 İnc) x6 = 30
8. = 30Sc
9. (4Sc, 1 İnc) x6 = 36 10-11. = 36Sc
12.12Sc, (lSc, 1 İnc) x6, 12Sc = 42
13. (1Sc, 1İnc) x3, 9Sc, (2Sc, 1İnc) x4, 9Sc, (1Sc, 1 İnc) x3 = 52
14.1İnc, 50Sc, 1İnc = 54
15-21. = 54Sc
22. (7Sc, 1 Dec) x6 = 48
23. (6Sc, 1 Dec) x6 = 42
24. (5Sc, 1 Dec) x6 = 36
25. (4Sc, 1 Dec) x6 = 30
26. (3Sc, 1 Dec) x6 = 24
27. (2Sc, 1 Dec) x6 = 18 fill
28. (1Sc, 1 Dec) x6 = 12
29. 6 Dec, close, cut the yarn and hide the end.
HANDS (2PCS)
Knitted chain 6 Ch, from the second loop from the hook
1.4Sc, 2Sc in 1 loop, on the back of the chain, 4Sc, 2Sc in 1 loop (12)
2.12Sc
3. Use, 4Sc in 1 loop (15)
4. Use 4Sc together (12)
5.10Sc, 1 Dec (11)
6.4Sc, 1 Dec, 5Sc (10)
7.4Sc, 1 Dec, 4Sc (9)
8.1 İnc, 3Sc, 1 İnc, 4Sc (11)
9-19. 11Sc fill the hand
20. 5 Dec, lSc close, cut the yarn and hide the end.
LEGS (2PCS)
Start crocheting from the foot.
Chain 6 Ch, with 2 hook loops
1.4Sc, 2Sc in 1 loop, on the other side of the chain, 4Sc,
2Sc in 1 loop (12)
2.4Sc, 2 İnc, 6Sc (14)
3- 5.14Sc
6.1 Dec, 4Sc, 1 Dec, 6Sc (12)
7-10. 12Sc fill.
11.6 Dec
Pull the hole in the heel, trim the yarn and hide the end.
Then crochet along the foot up.
1. Knit along the foot 16 Sc in a circle, as you can see in the photo See the photo.
2-13.16Sc
14.7Sc, 1 İnc, 7Sc, 1 İnc (18)
15-17. 18Sc fill legs
18. (lSc, 1 Dec) x6 (12)
19.6 Dec close, cut the yarn and hide the end..
Ears
1. 6 Sc in the magic ring, a thread. Sew ears between 14 and 16 rows.
Sew hands and feet. Sew hands between 4 and 5 in rows, sew legs between 20 and 21 rows
ASSEMBLY
Eye curler
Find places to pull your eyes between the 15th and 16th rows.
Step 2 stitches to the right and left of the nose for each eye.
For the left eye of the pair: insert the needle near the neck and pull it out between the 15th and 16th rows, stepping
2 stitches to the right of the nose. Sew 3 more stitches to the right and pull the needle back to the bottom neck.
Do not pull the thread right now! Repeat for the right eye, but go left.
Now you can pull the thread, but not very much! Tie, hide the thread.
Mouth tightening In the place of eye extension between the 15th and 16th rows (you can start as with go eyes, and from the left eye) insert the needle and take it out in the 22 row, parallel to the nose, make 2 stitches, insert the needle and pull it back into the eyes by pulling.
Make a knot, hide the threads. Repeat with the second eye to maintain eye symmetry.
We knit a sponge.
Tie the hook ohm 5 ch sew in 22 row as shown Pulling the navel and bottom backs.
Insert the needle into the center of the abdomen and pull it out in the back parts. Go down, insert the needle between your legs and pull it back to the top of the backside.
Repeat twice, fasten, trim the yarn and hide the thread.
The doll has eyes, embroider two lines for the eyes and glue the eyelashes.
Climb 3 rows up and embroider eyebrows.
Wig
Attach hair as usual, like a fringe. Cut hair to the required length, approx. 20 cm and attach them around the head and at the top of the head. Divide your head into two parts, attach hair along the part. With the same thread, make several seams along the head so that there are no empty spots in the hair. See the photo below.
You can split each thread into two parts using a needle to the hairstyle looked more interesting. Make ponytails Make tinted cheeks.
Trousers
Each row starts with 1 Ch and ends with the joint venture.
1 part: we collect a chain of 24Ch, connect in a circle and we knit 24Hdc
1. change color to white, 24Sc
2. change color to green, 24Hdc
3. change color to white, 24Sc
4. change color to green, 24Hdc
5. change color to white, 24Sc
2 part: we collect a chain of 24Ch, connect in a circle and knit
24Hdc
1. change color to white, 24Sc
2. change color to green, 24Hdc
3. change color to white, 24Sc
4. change color to green, 24Hdc
5. change color to white, 24Sc
We knit another 5Ch to connect the parts.
Combine
1.24 Hdc in the first part, 5 Hdc in the chain, then 24 Hdc in the 2nd part, 5
Hdc Chain (58)
2.4.6.8.10.12 rows 58 Sc
3.5.7.9.11 rows 58 Hdc
Fasten, trim the yarn and hide the end.
We knit a chain of 105 Ch for the lace, insert it into the pants.
Blouse
We collect a chain of 35 Ch, with 3 loops from the hook:
1.6Hdc, 3Hdc in 1 loop, 5Hdc, 3Hdc in 1 loop, 7Hdc, 3Hdc in 1 loop, 5Hdc, 3Hdc in 1 loop, 6Hdc (41) turn
2.1Ch, 7Sc, 3Sc in 1 loop, 7Sc, 3Sc in 1 loop, 9 se, 3Sc in 1 loop, 7Sc, 3Sc in 1 loop, 7Sc (49)
turn.
3.2CH, 8Hdc, 3Hdc in 1 loop, 9Hdc, 3Hdc in 1 loop, 11Hdc, 3Hdc in 1 loop, 9Hdc, 3Hdc in 1 loop, 8Hdc (57)
turn
4.1Ch, 9Sc, 3Sc in 1 loop, 11Sc, 3Sc in 1 loop, 13 se,
3Sc in 1 loop, 11Sc, 3Sc in 1 loop, 9Sc (65) rotation
5.2CH, 10Hdc, skip 13 loops for the sleeve, 19Hdc, skip 13
hinges for a sleeve, 10Hdc (39) turn
6. Ch, 10Sc, 1 İnc, 17Sc, 1 İnc, 10 Sc (41) turn
7. 2Ch, 1 Hdc, 1İnc, skip 1 loop, 9Hdc, 3Hdc in 1 loop, 17Hdc,
3Hdc in 1 loop, 11Hdc (45) rotation
8.1ch, 45Sc rotation
9.2Ch, 12Hdc, 3Hdc in 1 loop, 19Hdc, 3Hdc in 1 loop, 12Hdc (49) rotation
10.1Ch, 13Sc, 3Sc in 1 loop, 21Sc, 3Sc in 1 loop, 13Sc (53)
Finish, cut and hide the thread. Sew a button.
Pillow
We dial 16Ch, with 2 loops from the hook
1.15Sc, rotation
2-33. 1Ch, 15Sc, rotation
Fold in half and sew along the edges, fill a little.